|
FUME CUPBOARDS |
|
STANDARD COMPONENTS IN ALL FUME
CUPBOARDS |
| |
|
EPOXY RESIN WORKTOP & CUP SINK |
|
Made of black epoxy resin dished
top 15/25 mm thick. Top supplied
with one epoxy resin cup sink
size: 267x114 mm with
polypropylene bottle trap. |
| |
|
BACK BAFFLES |
|
Made of Trespa Athlon flat panel
based on thermosetting resins,
homogeneously reinforced with
cellulose fibbers and
manufactured under high pressure
and temperature. Trespa Athlon
panels have an integrated,
decorative structure based on
modified melamine |
|
Trespa Athlon thickness for back
baffles: 6 mm |
| |
|
AIR FOIL |
|
Aerodynamic shape airfoil made
of stainless steel fitted on the
front edge of the worktop. |
| |
|
GLASS SASH |
|
Full-view 6 mm toughened glass
sliding sash is supported by a
counterbalance on nylon covered
steel wires, with ball bearing
pulleys. Sash is supplied with
full width handle. Load capacity
of each pulley is 40 kg. |
| |
|
MECHANICAL FITTINGS |
|
Fittings are manufactured
according to ISO 9001
standard/EN 29001/BS 5750 part
1. Made from best quality brass
(DIN 17660). Fittings are
surface-treated with highly
chemical resistant powder
lacquer. Fittings usually
delivered in light gray color
No. 2700 |
|
-
Cold water fitting |
|
-
Gas fitting (available for all
gases) |
|
-
Distilled water fitting |
|
-
Vacuum fitting |
| |
|
LIGHT |
|
The light fitting is connected
to a switch fitted on the front
operating panel. An airtight
toughened glass plate is fitted
in the top of the fume chamber
to separate the light fitting
from the inner fume chamber. |
| |
|
ELECTRICAL FITTINGS |
|
Fume Hood is supplied with 20AMP
fan switch with light indicator,
10AMP light switch, 13 AMP
double electrical socket. All
fittings positioned on the
service panel. |
| |
|
BASE CABINET |
|
Made from 18mm plywood covered
with 0.7mm white matt HPL on
both sides with 0.5 mm white PVC
edging strips. Doors covered
with 0.9mm HPL on both sides
with 3mm black PVC edging
strips, each door supported by
two 165° Snap-on hinges. |
| |
|
FRAMEWORK |
|
Constructed from 30x30x1.5mm
square steel section, epoxy
powder coated. Framework
supplied with adjustment feet
±
15 mm. |
| |
|
EXHAUST FAN |
|
Centrifugal extractor fan with
IP 55 protection. Fan house is
adjustable, UV resistant and
made of polypropylene. Wheel is
made of polypropylene and fitted
to a graphitized nylon hub. Each
fan is supplied with motor
base. |
| |
|
AIRFLOW MONITOR (Optional) |
|
Safety device to measure face
velocity of air entering the
open sash area with audiovisual
low air alarm. Airflow Monitor
complies with British Standard
and COSHH requirements. Panel
includes analogue meter with
continuous reading of face
velocity, air sa |
| |
|
DIGITAL AIRFLOW MONITOR
(Optional) |
|
Airflow is a Safety device
monitor to measure face velocity
of air entering the open sash
area with audiovisual low air
alarm. |
|
Airflow monitor comply with BS
and COSHH requirements. Panel
include digital display of face
velocity in m/ sec or fpm, LED
indicates for safe and alarm
conditions and configuration,
Plug-in connections for power
supply and airflow sensor, with
3 programm |
|
Device will be positioned on the
top of the Fume chamber. |
| |
| |
|
FUMETECH – 10 |
| |
|
Size (overall) |
|
Width: 1200/1500/1800 mm |
|
Depth: 900 mm |
|
Height: 2400 mm |
| |
|
CHAMBER |
|
Chamber consists of 18 mm
plywood covered with 0.7 quartz
finish HPL on both sides with
0.5 mm white PVC edging. |
| |
| |
|
FUMETECH – 20 |
| |
|
Size (overall) |
|
Width: 1200/1500/1800 |
|
Depth: 770 mm |
|
Height: 2400 mm |
| |
|
CHAMBER |
|
Made of Trespa Athlon flat panel
based on thermosetting resins,
homogeneously reinforced with
cellulose fibbers and
manufactured under high pressure
and temperature. Trespa Athlon
panels have an integrated,
decorative structure based on
modified melamine |
|
Trespa Athlon thickness for
chamber: 13mm |
| |
|
TRANSITION HOOD |
|
Fume Hood chamber is provided
with transition hood from
rectangular to round. Connecting
Fume Hood exhaust to duct system
and fitted on top of the Fume
Hood. |
| |
| |
|
FUMETECH
– 30 |
|
Double Skin Fume Cupboard |
| |
|
Size (overall) |
|
Width: 1200/1500/1800 mm |
|
Depth: 900 mm |
|
Height: 2480 mm |
| |
|
CHAMBER |
|
Aerodynamic design, double-wall
fume chamber. Outer skin made of
1mm thick epoxy powder coated
steel sheets. The internal
lining and constructed from
Trespa Athlon, white, Solid
Grade Laminate panels in 6mm
thickness for chamber sides and
back baffles, a |
| |
|
TRANSITION HOOD |
Fume Cupboard chamber provided
with transition hood from
rectangular to round. Connecting
Fume Cupboard exhaust to duct
system and fitted on top of the
fume cupboard. Hood made of
stainless steel.
|
